Medium Tripple
When 90% of electrodes on the market are dual contact designs you need to come up with something a little different. With 20 years of experience hours of play and a very active imagination, we believe we have come up with something that is most certainly different, and takes e-stim to the next level.
New Design
If two contact BiPolar Electrodes generate so much pleasure, just think what could happen if we offered you something more. So we did.
Lovers of E-Stim meet the Medium Tripple!
The overall design has changed from our classic electrodes with a more pronounced neck section giving better retention but we have still retained our exclusive satin finish.
Multiple options
Obviously the Medium Tripple was created with the TriPhase cable in mind, but you can still use them with a single or dual channel unit, and standard 4mm cables, you just have more choice and more options compared to a BiPolar Electrode.
Using just a single channel you have several contact options Top/Base, Top/Mid, and Mid/Base, and of course if you are using an E-Stim Systems power unit with asymmetrical outputs swapping the leads can result in a different sensation.
The base of the Tripple is marked with dots to indicate which 4mm socket connects to what contact, so it is easy to work out the connections.
Multiple ideas
*colours indicate contact options, not the colour of the electrode
Use Base/Mid for a similar feel to our standard bipolar electrodes. Base/head for a wide experience over a larger stead, mid to head for that deeper feeling.
If you don’t want to try the TriPhase cable but want cock AND an insertable (prostate play???) then why not try base/mid on one channel, and then the Tripple head to cock ring or loop on the other - just experiment to find out what works for you.
Cleaning
The Medium Tripple can also be taken apart for cleaning. Please do not use caustic cleaning substances for cleaning as this may discolour the electrode.
Covered by our lifetime guarantee, and supplied in a protective storage tube.
Electrode Specifications
| Type | |
|---|---|
| Diameter | |
| Overall Length | |
| Insertable Length | |
| Weight | |
| Connections | |
| Guarantee |
Cable Guide
In order to use this electrode with an E-Stim Systems power box you will need a cable with 4mm connections. If you are planning to use it with an alternative powerbox, then have a look at our Cables and Adaptors Range for suggestions.
E-Stim Safety
Always play below the waist unless you know what you're doing and accept any risks.
Never use E-Stim around the neck or head.
Do Not use E-Stim if you are pregnant, have epilepsy, a heart condition, or any kind of electronic implant (e.g. pacemaker or insulin pump).
If you're unsure, consult your medical practitioner before using E-Stim.
Always start with the lowest setting and increase slowly.
Keep the electrodes away from broken or irritated skin.
We recommend the use of water based lubricant such as our ElectroGel for play so as to ensure easy insertion and good conductivity. Do NOT use silicone or Hybrid lubricants. Please note condoms cannot be used with our electrodes.
We have always said that we pride ourselves on not just our products, but also the service we offer. Unlike other manufacturers we don't just sell boxes off a shelf, we strive to create the ultimate in E-Stim pleasure, and we are trying to offer you that little bit more.
All of our control units and our premium electrodes are covered by a LIFETIME GUARANTEE. In other words if it fails in reasonable use, within your lifetime, and you are the original purchaser, we will endeavour to repair or replace it free of charge. All you need to do is get the item back to our workshops in the UK, and if its older than a year, then we ask for a fee to cover return shipping.
Before you start
- Switch the powerbox off
- Unplug and disconnect the electrode.
- Disassemble the electrode ensuring you don't loose any bits.
Cleaning
Use mild, fragrance-free soap medical grade cleaning solutions or a toy cleaner. Do NOT use alkaline or caustic cleaning solutions. Clean all surfaces, seams, and grooves. Rinse any residue cleaner off to prevent irritation.
Sanitise
- Wipe with 70% isopropyl alcohol.
- You can boil or steam sterlise the electrodes but this may cause slight discolouration. It does not effect the electrodes operation.
Dry
- Pat dry with a clean, lint-free towel.
- Air-dry fully before storage.
Storage
- Once dry return to the storage container.
We always package orders discreetly using plain packaging for your discretion.
We ship from our workshops in the UK.
Export orders to locations other than Norway have UK VAT (20%) removed from our prices.
It is your responsibility to understand any local rules regarding importing products from abroad into your country, as you may be liable to customs fees and/or local taxes.
